Product Code Database
Example Keywords: raincoat -the $2-121
   » » Wiki: Live Steam
Tag Wiki 'Live Steam'.
Tag

Live steam is under pressure, obtained by heating water in a . The steam may be used to operate stationary or moving equipment.

A live steam machine or device is one powered by steam, but the term is usually reserved for those that are , , , or otherwise used for heritage, museum, entertainment, or recreational purposes, to distinguish them from similar devices powered by electricity, internal combustion, or some other more convenient method but designed to look as if they are steam-powered. -earning steam-powered machines such as mainline and steam locomotives, full-sized , and the worldwide electric power-generating industry are not normally referred to as "live steam".

and are popular, in 1:4 or 1:3 scale, as are model stationary steam engines, ranging from pocket-size to 1:2 scale.


Railroads or railways
Ridable, large-scale live steam railroading on a backyard railroad is a popular aspect of the live steam hobby, but it is time-consuming to build a locomotive from scratch and it can be costly to purchase one already built. , in smaller scales (that cannot pull a "live" person nor be ridden on), offer the benefits of real steam engines (and at lower cost and in less space), but do not provide the same experience as operating one's own locomotive in the larger scales and riding on (or behind) it, while doing so.

One of the most famous live steam railroads was 's Carolwood Pacific Railroad around his California home; it later inspired Walt Disney to surround his planned with a working, narrow gauge railroad.

The live steam hobby is especially popular in the UK, US, New Zealand, Australia, and Japan. All over the world, there are hundreds of clubs and associations as well as many thousands of private backyard railroads. The world's largest live steam layout, with over of trackage is Train Mountain Railroad in , . Other notable layouts are operated by the Los Angeles Live Steamers Railroad Museum and the Riverside Live Steamers.


Scale
A live steam locomotive is often an exact, hand-crafted . Live steam railroad scales are generally referred to by the number of inches of scale per foot. For example, a 1:8 scale locomotive will often be referred to as a 1½" scale locomotive. Common modelling scales are Gauge 1 (), 1/2" (), 3/4" (1:16), 1" (1:12), 1½" (1:8), 2½" (~1:5) and 3" (1:4).


Track gauge
refers to the distance between the rails. The ridable track gauges range from to , the most popular being , , , and (see Rail transport modelling scales). Some live steam club layouts use tracks. Gauges from and up are called "Miniature Railways" (in the US these are known as " Railroads"), and are used mostly in amusement park rides and commercial settings.

Often the gauge has little to do with the scale of a since larger equipment can be built in a narrow gauge railway configuration. For instance, scales of 1.5, 1.6, 2.5, and 3 inches per foot (corresponding to scales of 1:8 to 1:4) have been used on a track gauge.

The generally accepted smallest gauge for a live steam locomotive is . Producing smaller-scale models remains problematic, as the laws of physics do not themselves scale: creating a small-scale boiler that produces useful quantities of steam requires careful engineering. has produced commercial live steam-powered locomotives in by utilising an electrically heated boiler mounted in the tender, with cylinders in the locomotive, and control provided by electrical signals fed through the track from a remote control unit. They are less mechanically realistic than models in larger scales; the visible valve gear is a dummy, as on the electric-motor-powered models, and steam admission to the cylinders is controlled by a rotary-valve inside the boiler casing, which is also a dummy. Nevertheless, the locomotive is driven by steam that is created on board the locomotive and is hence a genuine steam locomotive.

It is technically possible to build even smaller operating steam engines. Hand-made examples, as small as (1:220), with a gauge of only , have been produced. These are fired with a flame from a burner in the engine's tender. AA Sherwood of Australia, an engineering lecturer, produced some miniature scale model live steam engines in the late 1960s and early 1970s. His smallest live steam engines were 1:240 scale which is smaller than the 1:220 of Z Scale. The smallest scale Sherwood worked in was 1:480, though that was not live steam.


Technology
A wide variety of boiler designs are available, ranging from simple externally fired to sophisticated and even boilers usually found only on larger, more complex models.

For basic locomotive models, a simple can be used, with the reversing (if any) performed by a , or by using a "slip" eccentric.

More complex locomotive models can use valve gear similar to real steam machine with the reversing done mechanically, most frequently the Walschaerts type.


Fuels
There are several common fuels used to boil water in live steam models:

  • Hexamine fuel tablets – which produce relatively little heat but are cheap and relatively safe. They are often used on "toy" live steam locomotives and engines, such as the newer models in the range produced by .
  • Methylated spirit, (methanol/ethanol mixture) – which burns hotter than solid fuel, but, as with any flammable liquid, requires more careful handling. Cheap and easy to obtain, this fuel was used with early Mamod models.
  • gas – clean burning and safe, but relatively expensive to engineer the burners.
  • – delivered via the track and used to boil the water with an . In 2003, launched a range of 00 gauge models that run from a 10 to 17 Volt power supply, making this method safer than previous, higher voltage versions.
  • – which is the prototypical fuel for most full-sized steam locomotives, and the preferred fuel for ridable trains. It can also be used in boilers down to at least .
  • – also a popular fuel for large, ridable trains.
  • gas – an alternative to coal or oil in large-scale models. Propane has also been used successfully as fuel in smaller 1:48 scale live steam locomotives produced most notably by Roland Neff.


Road vehicles
Live steam road vehicles are popular with model engineers because they are not restricted to running on tracks or water and can be easily transported to rallies and exhibitions. They include & , showman's engines, , , road-making & agricultural machines, often seen with ancillary equipment like threshing machines.


Boats and ships
Most types of and that were powered by steam in real life can be found as live steam . These include, amongst others, , launches, , , , and . A specialized type is the tethered hydroplane. When steam-powered, these often have .


Stationary engines
Stationary engines tend to be less popular with modelers than mobile engines; probably because they are less easily transportable. They are more popular with toy makers. They can be anything from small farm engines to and .


Toys
In the late 19th and early-mid 20th centuries, live steam toys were extremely popular, with some large manufacturers like Bing selling hundreds of different models in large quantities. There were very many smaller manufacturers all over the world. Some of these, like , and Jensen, are still in business making live steam toys, although they are now mainly marketed as collectables and novelties rather than toys. Toys tend to be less accurate representations of real life equipment than are models and many are somewhat generic in nature. The range includes all those seen as models and some of a purely novelty kind.


Festivals
A live steam festival (often called a "Steam Fair" in the UK and a live steam "meet" in the US) is a gathering of people interested in steam engine technology. Locomotives, trains, , , , showman's engines and , and , and stationary steam engines may be on display, both full-sized and in miniature. Rides may also be offered.


Publications
There are several magazines devoted to the live steam hobby:

"" is an English publication that is published twice a month and was founded in 1898. Most locomotive articles have an "English" flavour popular in the UK, Australia, New Zealand and South Africa. The magazine is aimed at constructors but also covers non-steam and non-rail model engineering interests.

"Live Steam & Outdoor Railroading" is a U.S. magazine, founded in 1966 and devoted to the live steam hobby, as well as to other uses of miniature and full-size steam. Originally, it was a , but soon expanded into magazine format. In 2005, the name was changed from "Live Steam". It is currently published bi-monthly, with a of slightly over 10,000 (Dec. 2004).

The now-defunct publication (launched in 2006), was "The Home Railway Journal". which was specifically aimed at enthusiasts with ride-on railways (although not just steam-powered) in North America. It was published quarterly in Sacramento, California, US.


See also
  • – the 'Birmingham Dribbler' locomotives were a very early form of live steam toy
  • List of steam fairs
  • Live Steam & Outdoor Railroading (magazine)
  • Model engineering
  • Model steam engine
  • Railway modelling
  • Rail transport modelling scales
  • Superheated steam
  • Ridable miniature railway
  • Backyard railroad

Page 1 of 1
1
Page 1 of 1
1

Account

Social:
Pages:  ..   .. 
Items:  .. 

Navigation

General: Atom Feed Atom Feed  .. 
Help:  ..   .. 
Category:  ..   .. 
Media:  ..   .. 
Posts:  ..   ..   .. 

Statistics

Page:  .. 
Summary:  .. 
1 Tags
10/10 Page Rank
5 Page Refs
2s Time